The Tulsa Compact-T Production Wellhead with The Tulsa Auto Aligned Stuffing Box is a three piece compact wellhead consisting of: The Tulsa Production BOP, Production Flow Tee, in a one piece construction, with the two piece Tulsa Automatically Aligning Stuffing Box, is a low profile wellhead which allows the stuffing box to follow a misaligned polished rod. The Tulsa Auto Align feature results in less wear to the stuffing box packing, and eventual damage to the polished rod when the misaligned polished rod destroys the stuffing box packing. It dramatically increases the useful life of the stuffing box packing, reduces oil spills at the wellsite along with the costs of cleanup, thus reducing operating costs. The machined interior of the production bop valve incorporates an "o"-ring at the end of the piston for a smooth operation and sealing.

Reduce your workover costs: By removing the stuffing box packing, the sucker rod string and down hole insert pump can be easily pulled through the Tulsa Production Wellhead. This will save you hourly workover rig costs by eliminating the necessity of first, removing the wellhead, and secondly, replacing it after workover is complete.

The Tulsa Compact-T Production Wellhead, is 19" shorter than three piece wellheads and when used with a small pumping unit will eliminate the costs associated with building up beneath the pumping unit in order to be above the standard, higher profile production wellhead. It also allows the pumper to change out the stuffing box packing while standing on the ground, contributing to a safer work environment for your employee, who often works alone.  (Click here to enlarge diagram.)

Benefits: Less installation costs for the one piece production wellhead, less installation costs for installing a smaller pumping unit, less workover cost, less replacement of stuffing box packing, and less injury risk for your employees.